Medical Disposable Gown Non-woven SMS 40 g/m², Cuffs, Unisex
Disposable medical gown made of three-layer non-woven SMS material (spunbond + meltblown + spunbond) with a density of 40 g/m², intended for non-sterile use in medical and cosmetology institutions. The middle meltblown layer acts as an aerosol barrier, trapping microparticles and non-toxic biocontaminants. Textile cuffs secure the sleeve at the wrist, while back ties made of SMS tape ensure a reliable fit.
Features and Benefits
40 g/m² density — an optimal choice for personnel with moderate barrier protection requirements: cosmetologists, nurses during outpatient appointments, diagnosticians.
Features and Benefits
- Three-layer SMS structure (spunbond + meltblown + spunbond): the middle meltblown layer provides a barrier against aerosols and non-toxic biocontaminants during non-sterile procedures.
- 40 g/m² density: optimal balance of breathability and barrier properties — lower thermal load during long-term wear compared to the 45 g/m² version.
- Elastic textile cuffs: prevent the sleeve from slipping and exposing the skin of personnel in the work area.
- Back ties made of SMS tape: reliable fixation without additional fasteners, easy to put on and take off.
- Unisex cut, size 125×150 cm: fits most adults without split size charts.
- Packaging: 100 units per box: convenient for warehouse storage and logistics in healthcare facilities.
When to Choose
- Optimal for cosmetology rooms, diagnostic appointments, administrative and support staff in clinics — where barrier protection requirements do not exceed non-sterile use.
- Suitable for dental appointments, sanitary-epidemiological events, and procedures without contact with biological fluids under pressure.
When NOT to Choose
- Not intended for invasive surgical operations or procedures with a high risk of biological fluid splashes. For operating rooms with enhanced barrier requirements, choose the Surgical Gown 45 g/m² from this catalog.
How It Differs from the 45 g/m² Model
- The 12.5% difference in weight directly affects the thickness of the meltblown layer: at 40 g/m², vapor permeability is higher and the thermal load is lower. The 45 g/m² model is recommended for surgical blocks, while 40 g/m² is for cosmetology and outpatient personnel.
Characteristics
- Manufacturer: Noname
- Country of Origin: China
- Density: 40 g/m²
- Material: SMS - spunbond + meltblown + spunbond
- Cuffs: Comfortable elastic textile cuffs
- Tie: Back ties made of SMS tape
- Gender: Unisex
- Size: 125x150 cm
- Color: Blue
- Packaging: 100 pieces/box
- Box Size: 62x48x36 cm
Applications
Buy with this product
Anti-aerosol molded respirator 3M 9332 FFP3 with valve, 50 PEL
Three-panel molded FFP3 with Cool Flow™ valve. Up to 50 PEL, -30°C…+70°C. Protection against aerosols and welding fumes
Medical anti-dust respirator 3M 8210 FFP2 (KN95) without exhalation valve
Molded medical RPE FFP2 (KN95 equivalent) without valve. Protection against biological aerosols and dust up to 12 PEL
Professional construction respirator 3M 8822 FFP2 NR D, with valve
Molded FFP2 NR D with valve and 4-point straps. Up to 12 PEL against wood and construction dust. Professional RPE
3M 9001 V KN90 filtering construction respirator with dust protection
Foldable filtering RPE KN90 with exhalation valve. Budget protection against construction dust: gypsum, brick, plaster, sawdust
Filtering construction half mask 3M 6300 (L) up to FFP3, large size
Large reusable half mask (L) against dust, smoke, and aerosols. Up to FFP3 with 3M cartridges installed. For grinding and stone work
Panoramic laboratory and chemical protective glasses TECRON Clean Vision N110
Protective glasses against acid and alkali splashes with panoramic mono-lens, double-sided anti-fog/anti-scratch nano-coating, EN 170
TECRON 8110 Coated Work Gloves — Latex, Waterproof, Sandy Grip
Construction gloves with double latex coating: firm grip on wet surfaces, water protection, 13 gauge liner. GOST EN388.
